Tap Replacement in Fitzgibbon
A worn or dated mixer is usually what puts tap replacement in Fitzgibbon on the to-do list. The swap itself is licensed plumbing work in Queensland, so a licensed plumber handles the fitting, the connections and any paperwork.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Common calls include a laundry mixer past its second leak, a basin tap wobbling on its base, or a kitchen refresh where the new look needs new pipework. When a fresh washer would still fix the fault, that is a repair instead, and our tap repairs page covers that call. For the wider range of jobs, our tap and toilet plumbing page lists them all.
What Decides the Right Replacement Tap
A mixer and a pair of separate taps do the same job two ways. The mixer runs hot and cold to one spout from a single lever, while separate taps run one spout for hot and another for cold.
Beyond style, the new fitting has to suit four things the old tap left behind:
Holes
how many the basin or sink has, plus their spacing and width;
Mounting
deck fittings sit on the bench, wall fittings join pipework inside the wall, so a swap between them opens the wall or the bench, not just the tap;
Supply connections
the pipework and hoses the new tap has to accept;
Isolation valves
a small valve on each supply line stops flow at the tap, so the house keeps running.
We check the old fitting before you choose, because the replacement has to fit what it left behind. The same checks apply to ensuite work, and cistern jobs sit with our toilet repairs team.
Do You Need a Licensed Plumber to Fit a Tap
Yes, Queensland makes tap replacement licensed work: the QBCC keeps only one tap job on its unregulated list, changing a jumper valve or washer inside the tap. The regulator's home owner guide even uses a tap swap as its example of work that stays licensed.
Everything else sorts into two categories:
Minor work
a straight swap at the same spot, which a QBCC licensee does without a permit or Form 4;
Notifiable work
a tap added or moved in an existing building, where no council permit applies and the plumber lodges a Form 4 with the QBCC inside 10 business days.
Renters follow a separate track. A tenant who wants to attach any fixture asks the owner or manager for written sign-off on a Form 23 first, and a fair request should not be refused.
If a tap goes in without that sign-off, the owner or manager has three options. They can treat it as a breach and pursue dispute resolution, keep the change as an improvement, or remove the fixture and bill the tenant for that cost.
Certification Rules for Replacement Taps
WaterMark certification is the proof a tap meets Australia's plumbing code for safety and fitness. WELS registration comes from the Water Efficiency Labelling and Standards scheme, which rates a tap's stars and water use. A replacement tap needs both before it can legally go in, and the fitting carries the WaterMark trademark and the WELS details on its label.
Business Queensland requires a minimum 3-star WELS rating on showerheads and tap fittings, though renovations sit outside that rule. For water fixtures produced from 2005 onward, 3 stars or better is the rating to look for.
Buying online adds a check: the listing should carry the WaterMark trademark, the product specification and its licence number, plus the WELS registration details, star rating and water use.
- You can look a model up in either product database before paying.
- The store can supply anything missing, so ask rather than guess.
What Changes the Price of a Tap Replacement
The price turns on five things: the tap type, the isolation valves, the hole layout, the access underneath, and how many taps are on the list. Each one changes the time or the parts.
Switching between wall and deck mounting costs more, because the pipework inside the wall comes into play. A moved tap adds a Form 4 lodgement fee, which the contractor lodges and pays, then can bill back to the owner along with admin costs. The fixed quote settles the total once we have seen the job.
Tap Flow Limits for Rental Properties
Nine litres per minute is the ceiling for internal cold taps and single mixers before an owner can pass water charges to a tenant. The rule reaches the cold taps above a basin, sink or laundry trough, single mixers included. Bath taps, garden taps and the taps feeding appliances sit outside it.
Passing the limit is not compulsory for every rental; it is the test for passing the full water bill across. The Residential Tenancies Authority recommends keeping plumbing reports or compliance certification, receipts, packaging, and any warranty or instruction manual as proof. For the wider charging rules, the tenancy authority's water-charging fact sheet spells them out.
Young Estates, Ageing Tapware
Most of the suburb's housing went up after 2000, so the builder-chosen mixers around places like the Fitzgibbon Community Centre are ageing together. Streets went up to a shared specification, and one weak batch of tapware can repeat from house to house.
At the last census, 20.8 per cent of homes in Fitzgibbon were owned outright and 40.3 per cent carried a mortgage, so most callers want price certainty. A flat-rate quote before the old tap comes off keeps the job predictable.
How Your Tap Replacement Runs
- 1
Tell us what's happening
Call (07) 3523 6417 or send the form with a few details about the problem in Fitzgibbon. A clear description helps us bring the right parts.
- 2
We match, isolate and fit
We check the hole layout, the mounting and the supply lines, shut the water at the isolation valves, and fit the new tap onto the existing pipework. Every swap ends with a leak test at the spout and under the basin.
- 3
Approve a fixed price
You get a fixed quote before any work starts, with flat-rate pricing and no hidden fees. Nothing goes ahead until you say yes.
- 4
Pay when it's finished
Pay by card or EFTPOS on site once the job's done, or ask about Fix now, pay later.
Plumbing job in Fitzgibbon?
$0 call-out fees, available 24/7, and same-day where we can.
Questions About Tap Replacement in Fitzgibbon
Call (07) 3523 6417What am I looking for when a tap says WaterMark or WELS?
WaterMark certification shows the tap meets Australia's plumbing code for safety and fitness. WELS registration gives the star rating and water use. The tap cannot legally go in without both, and we check them before quoting.
Does replacing a tap in Fitzgibbon need a Form 4 or a permit?
No, a straight swap needs neither. Like-for-like work is minor, so no permit or Form 4 applies. A moved or added tap is notifiable work, notified to the QBCC on Form 4 within 10 business days, though combined drains or dual water supplies can need a permit first.
Can a plumber move my kitchen tap to a new spot?
Yes, a plumber can move it. Relocating a fixture in an existing building is notifiable work, so our licensed plumber lodges a Form 4 with the QBCC within 10 business days of finishing. A standard move needs no council permit.
Can a tenant in Fitzgibbon change a tap in the rental?
No, the swap is licensed work, so the owner or manager arranges it. Attaching any fixture needs the owner's or manager's written sign-off on a Form 23 first, and a fair request should not be refused.
What should my new tap match on the sink?
Your new tap should match the hole count and spacing, deck or wall mounting, and the supply lines beneath. We measure the old one before you buy, so the replacement fits first time.
Call Us About Your New TapWe'll call you back.
Call (07) 3523 6417 to book a plumber in Fitzgibbon. We're available 24/7, with $0 call-out fees, flat-rate pricing and same-day where we can.
To claim your $0 call-out fee, call (07) 3523 6417 today.